Customisation

[Home]

If you want to you can use this to help you configure the options you like. If you can't decide on, or don't understand the implications of an option, have a look at the Considerations page.

This does not pretend to cover all the possible options - specific hardware and pick-up types, for example, would just create too many options. For these items and anything you know you want that is not covered, there is a text area that can be used.

You can save and load your options (including text) using the appropriate buttons.  If you want to start from scratch just use the "Clear" button.

Some of the options change depending on the type of instrument you select. If you change the instrument selection after values have been selected for these then they will be reset to their initial values.

If you want to use this as a basis for having your instrument made, then use the "Send " button to post it to me and I'll get in touch to discuss the finer points and any that you are unsure about. Using "Send" will also save the current values. Fields marked with "(R)" are required if you wish to use "Send". An Instrument type must be selected in order to be able to Save or Load.


Instrument type


 (R)

 

Number of Strings



Scale Length
inches(mm)

Neck Type


Body type


 

Machine Head Config

Number of frets

Neck Construction

Bridge/Tail Config

Tremelo
(tick if required)

 Neck Width

Fingerboard Wood

Pick-up Configuration
 Switch

 Bridge Position

 

Middle Position

 

 

 Neck  Position

 
Enter any additional requirements or comments which you feel may be relevant. in the space on the right.

 

 

 

 

 

 Contact details

Preferred contact method      

(R)

Your Name

 (R)

Your e-mail address

(R)

 Your Phone number

 (R)